There were no results for "".
If you are searching for a part number from a sensor engraving, you may be including a date code, gear pitch, or programming code.
Try searching again without any characters after an "_" or a blank space on the markings.
You may also find the product or information you need on one of the below pages:
For immediate assistance, please call us at: 970-879-9900.
Sensors For Counting or Position Tracking Detecting Multi-Pole Magnet Tape
Latching Hall Effect sensors when paired with alternating pole magnet tape or multi-pole magnet wheels provide a pulsing output with a 50% duty cycle.
- Single Channel Hall Latches provide a single output for counting where direction does not matter.
- Quadrature latching sensors provide a second out of phase output so that a counter can determine which direction the target is moving.
- Count and Direction Hall Latch Sensors provide a second output that is high in one direction of movement and low in the opposite direction of movement.
4 pole per inch magnetic tape is available in our Accessory Catalog.
When pairing a Quadrature or Speed and Direction Magnet sensor with multi-pole magnet tape, custom internal chip spacing is required. Contact our Sales Department for more information.
For more information about our sensors, how they work, and target magnet options, see our Application Notes.