There were no results for "".
If you are searching for a part number from a sensor engraving, you may be including a date code, gear pitch, or programming code.
Try searching again without any characters after an "_" or a blank space on the markings.
You may also find the product or information you need on one of the below pages:
For immediate assistance, please call us at: 970-879-9900.
Hall Effect Sensors for Counting Ferrous Targets
Sensor Solutions offers two styles of target tracking Hall Effect sensors for directional counting from a wide variety of ferrous metal targets.
Quadrature output sensors provide two out of phase digital pulsing outputs where direction of movement is resolved by comparing which output detects the target first in the tachometer or controller.
Speed and Direction Sensors provide one pulsing output, and a second direction output that is in the high state in one direction of movement, and low in the other direction of rotation.
Example targets that can be used with our Ferrous Target Tracking Sensors include:
- Tone rings, tone wheels, and face gears
- Holes in discs, pulleys, and steel plates
- Bolt heads, pins, and other steel protrusions
- Shaft Keyways and notches in shafts
- Steel inserts mounted in non ferrous discs and plates
- Cam shafts and crank shafts
Sensor Solutions speed and direction detecting sensors are built and tested specific to the pitch of the gear being detected. This ensures that the duty cycle and phase angle of the outputs are the best possible for resolving direction from your target.
Learn more about selecting a speed and direction sensor for your Application here .
For more information about our ferrous target tracker sensors, why we request the target pitch, and target gear design, see our Application Notes.