There were no results for "".
If you are searching for a part number from a sensor engraving, you may be including a date code, gear pitch, or programming code.
Try searching again without any characters after an "_" or a blank space on the markings.
You may also find the product or information you need on one of the below pages:
For immediate assistance, please call us at: 970-879-9900.
Detecting Position with Multi-Pole Magnets
Quadrature Hall Latch sensors paired with multi-pole magnet tape or magnet wheels can detect a rotational or linear change in position when the outputs are connected to a programmed counter. The sensor and magnets provide the counter with a 50% duty cycle and 90 degree phase angle to ensure accurate tracking of relative position as the target magnet moves perpendicular to the sensor face.
4 pole per inch magnetic tape is available in our Accessory Catalog.
Fully programmed counters are available in our Catalog.
When pairing a Quadrature or Speed and Direction Magnet sensor with multi-pole magnet tape, custom internal chip spacing is required. Contact our Sales Department for more information.
For more information about our sensors, magnet selection, and position monitoring, see our Application Notes.