There were no results for "".
If you are searching for a part number from a sensor engraving, you may be including a date code, gear pitch, or programming code.
Try searching again without any characters after an "_" or a blank space on the markings.
You may also find the product or information you need on one of the below pages:
For immediate assistance, please call us at: 970-879-9900.
Detecting Proximity with Multi-Pole Magnets
When a Quadrature Hall Latch sensor is paired with multi-pole magnet tape and mounted 90 degrees from the direction of movement can detect changing proximity when connected to a programmed counter. The sensor and magnets provide the counter with a 50% duty cycle and 90 degree phase angle to ensure accurate tracking of relative proximity as the sensor or magnet tape move relative to each other.
4 pole per inch magnetic tape is available in our Accessory Catalog.
Fully programmed counters are available in our Catalog.
When pairing a Quadrature or Speed and Direction Magnet sensor with multi-pole magnet tape, custom internal chip spacing is required. Contact our Sales Department for more information.
For more information about our sensors, magnet selection, and position monitoring, see our Application Notes.